 |
MSR43M-X is available ISO TK1, 2 &3, reads cards from 30% - 200% of ISO 7811 amplitude standard.
| Quantity: | |
|---|---|
MSR43M-X
HCCTG
43mm usb hid magnetic stripe swipe card reader MSR43M-X consists of a high-performance multi-channel fully integrated magnetic stripe decoder chip at a low-profile magnetic read-head. This innovative, yet low-cost card reading solution offers many important advantages over the conventional less-integrated approach.
Features
Available ISO TK1, 2 &3
Low-profile read head contains all needed circuits. Save space
No more mill volt-level analog signals to route; no analog signals leave the shielded magnetic head. Withstands noisy PC monitors, cell phones, switching power supplies, etc.
New design reads badly damaged cards; compensates for poor head mounting
Reads cards from 30% - 200% of ISO 7811 amplitude standard
Specification
Reference Standards | ANSI/ISO Standards 7810,7811-1/6, 7813 |
Recording Method | Two-frequency coherent phase (F2F) |
Decoding Metho ISO | Track1 - IATA Track2 - ABA Track3 - THRIFT |
Card Swiping Direction | Bi-directional |
Dimensions | 22.4*16*43 mm(H*W*L) |
Life | Electronics: 125,000 hours Head: 1,000,000 passes |
Environment | Operating Temp: 0°C ~ + 55°C |
Storage Temp:-10°C~ + 55°C | |
Humidity:10 ~ 90 relative | |
Interface | USB(HID -Keyboard Mode) |
RS232(optional) | |
TTL(optional) | |
MagStripe Card Reader Configuration Utility | Support Microsoft Windows98/ME/2000/XP/Vista32bit |
OPOS Driver | Win32-based POS device access. OPOS is currently deployed on Microsoft Windows 2000/XP/Vista/ Win7 32bit. |
Power Supply | DC 5V, thoughusb interfacecable. |
Power Consumption | Less than 8.5mA maximum total current when no card is being swiped, less than 10 mA maximum total current at 5V while card is being swiped. |
Card Swiping Speed | Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s) |
43mm usb hid magnetic stripe swipe card reader MSR43M-X consists of a high-performance multi-channel fully integrated magnetic stripe decoder chip at a low-profile magnetic read-head. This innovative, yet low-cost card reading solution offers many important advantages over the conventional less-integrated approach.
Features
Available ISO TK1, 2 &3
Low-profile read head contains all needed circuits. Save space
No more mill volt-level analog signals to route; no analog signals leave the shielded magnetic head. Withstands noisy PC monitors, cell phones, switching power supplies, etc.
New design reads badly damaged cards; compensates for poor head mounting
Reads cards from 30% - 200% of ISO 7811 amplitude standard
Specification
Reference Standards | ANSI/ISO Standards 7810,7811-1/6, 7813 |
Recording Method | Two-frequency coherent phase (F2F) |
Decoding Metho ISO | Track1 - IATA Track2 - ABA Track3 - THRIFT |
Card Swiping Direction | Bi-directional |
Dimensions | 22.4*16*43 mm(H*W*L) |
Life | Electronics: 125,000 hours Head: 1,000,000 passes |
Environment | Operating Temp: 0°C ~ + 55°C |
Storage Temp:-10°C~ + 55°C | |
Humidity:10 ~ 90 relative | |
Interface | USB(HID -Keyboard Mode) |
RS232(optional) | |
TTL(optional) | |
MagStripe Card Reader Configuration Utility | Support Microsoft Windows98/ME/2000/XP/Vista32bit |
OPOS Driver | Win32-based POS device access. OPOS is currently deployed on Microsoft Windows 2000/XP/Vista/ Win7 32bit. |
Power Supply | DC 5V, thoughusb interfacecable. |
Power Consumption | Less than 8.5mA maximum total current when no card is being swiped, less than 10 mA maximum total current at 5V while card is being swiped. |
Card Swiping Speed | Card speed through the unit may vary from 3 ips to 100 ips (7 cm/s to 250 cm/s) |
